Image

• Some of the images in the course do not show up and have a 'X' mark.

Some of the images in the course do not show up and have a 'X' mark.

The most common causes for this occurrence are:

1. The correct course CD is not in the computer's CD-ROM drive.
   To fix this
• Insert the CD-ROM disk into the CD-ROM drive. Wait for 10 seconds.
• Verify the CD-ROM drive is reading the CD-ROM disk.
  
  PC Users > Double-click My Computer icon on your desktop. You should see OMA1 as the name of the CD-ROM 1 disk and OMA2 for CD-ROM 2 disk. Please write down the drive letter next to the name of the CD.
  Mac Users > On the desktop you should see OMA1 for CD-ROM 1 disk and OMA2 for CD-ROM 2 disk. Please write down the name of the CD-ROM disk that appears on the desktop.
  




2. The CD-ROM Setup is not set properly.
   To fix this:

   • Launch Microsoft Internet Explorer and go to www.connect4education.org
   • Access the course and scroll to the bottom of the course until you see the blue Student Control Panel. Under the Content column, click CD-ROM Setup.
     
     
     Windows users, type your CD-ROM drive letter in the Windows Drive field. Please note: The Windows Drive field and Macintosh CD-ROM Name field can't contain information at the same time. If you are using Windows, the Macintosh CD-ROM Name field should be empty. If you are using a Macintosh, the Windows Drive field should be empty.
     
     
   • Click Setup. You will receive a confirmation "Your CD-ROM setup has been changed."
   • Reminder: Anytime you switch to a different computer you will need to do your CD-ROM Setup in the course.